Concrete calculator for slab in 1 click

Ashwini Kumar

8 months ago

For any RCC building, it’s necessary to know the concrete quantity for the slabs, beams, footings, and columns. These make a key contribution to the stability of both residential and commercial buildings. Concrete calculator is used for calculating the concrete volume.

Concrete volume using concrete calculator

Concrete Volume is a term that refers to the space occupied by concrete.
Concrete volume is the total amount of concrete used in filling a structure.

Usually, it is measured using cubic meters (m³). Calculating concrete volume precisely using concrete calculator allows you to save materials and keep costs under control.

Check our FREE Concrete Volume Calculator

Other Related links:

Here’s how to make use of the Concrete Calculator for slab, beam, column, footing.

1.Launch the Calculator.

Under the menu are the options for Footings, Columns, Beams, and Slab.

2.Concrete calculator for footing

Enter the required number of footings.
Enter the length, width, and depth of a single footing (in meters).

3.Cocnrete calculator for column

Enter the number of columns.
Enter the length, width, and height of one column in meters.

4. Concrete calculator for beam

Enter the number of beams you want.
Enter the length, width, and height of the beam (measured in meters).

5. Concrete calculator for slab

Enter the value of length, width, and depth (in meters).

6. Click the Calculate Volume button to find the result.

The outcome will be seen in the Results area.
Measurements for each type of support structure (Footing, Column, Beam, Slab).
Equations involved in the process.
The concrete amount required in the form of cubic meters.

Cover block in concrete

Concrete in slab :Floors and ceilings are made from horizontal pieces called slabs. Most of them are around 100 mm to 200 mm in thickness. The minimum cover blocks in slab is 20mm -25mm thick.Keeping a cover block between the reinforcement and the concrete ensures both durability and resistance to corrosion.
Concrete in beam: Beams help to bear the weight that comes down from above them. A column distributes the load given by a slab. The minimum cover block in beams is 25mm to 40mm thick.
Concrete in column: The columns run along the main building, helping to support the beams and slabs. The minimum cover block in column is 40mm.
Concrete in footing: The foundation has concrete in it. They spread the weight of the building to the ground. They provide the necessary support to the structure. Minimum cover block in footing is 50mm thick.

Also read:

FAQs for concrete calculator

1. How should I determine the concrete volume for columns, beams, footings, and slabs?

Apply the standard formula to convert the unit. The volume can be calculated as Length × Width × Height/Thickness. To calculate the volume, multiply the dimensions (in meters) together.

2. Why are cover blocks needed in concrete structures?

Concrete blocks help maintain an appropriate space between the steel and the outer part of the concrete. It ensures the steel resists corrosion, fire, and other kinds of environmental damage.

3. What is the recommended concrete cover for footings, columns, beams, and slabs?

For the footings is 50 mm. Columns is 40 mm. The beams range from 25 to 40 mm thick. and for slab is between 20 mm and 25 mm thick. Not all the values can be identical due to factors such as climate and building regulations.

4. Is this concrete volume calculator suitable for both residential and commercial purposes?

The calculator works for all types of RCC in residential, commercial, and industrial buildings. Always provide exact values for the best results.

5. Why is it necessary to measure the concrete volume precisely in construction?

We can try to use materials efficiently.
Lower the cost of building a project.
It will enhance the planning process and coordination for the project.

Also read: