Brick Work Cement Mortar Calculator is developed to calculate brickwork calculation for wall, cement, sand, amount of water used, total cost with the use of standard construction formulas.
Cement mortar is one of the tasks in brick masonry work that must be accurately calculated. The mortar is cement that holds bricks together, gives them weight and thus makes walls durable. Any error in estimating the amount of mortar can lead to the shortage of the material or wastage or the exceedance of the budget.
This brick work cement mortar calculator will best suit for site engineers, contractors, architects and homeowners who wish to get fast and sound estimates regarding a project involving brickwork.
What This Brick Work Cement Mortar Calculator Does?
Using the brick work cement mortar calculator, you can:
- brick work calculation for wall depending on the size of the walls.
- Calculate the number of bricks that are needed depending on the size of the bricks.
- Divide the amount of cement in bags.
- Divide the volume of sand in m 3 and tons.
- Divide water need in liters.
- Determine cost estimate of cement and sand.
Each and every calculation is presented transparently in the results section and it is simple to comprehend and confirm the formulas at the backend.
Also check other Civil Calculators:
- Brick & AAC block calculator in India
- Concrete calculator for slab in 1 click
- Retaining wall estimate in 7 steps
- Material Calculation for plastering in 1 click
Steps for using this Brick Work Cement Mortar Calculator
Given below are the steps involved for using this free brick work cement mortar calculator for brickwork calculation for wall.
1.Step 1: Enter Wall Dimensions
The first step is to type in the length of the wall and the height of the wall in meters. Then choose the thickness of the wall, half or full brick (115 mm and 230 mm). The sum of the brickwork is computed using these inputs.
2. Step 2: Select Brick Size
Select the type of brick applied in the construction:
- Standard red brick
- Fly ash brick
- Custom brick size
In case you choose the Custom Brick Size, then the size of bricks is self-manual. This step assists the calculator to decide the total bricks that are needed in the right number.
3. Step 3: Choose Mortar Ratio
Choose the mortar mix ratio that includes 1: 3, 1: 4, 1: 5, or 1: 6. Based on the ratio chosen, the calculator automatically splits the dry mortar volume into the quantity of cement and sand.
4. Step 4: Enter Material Rates
Input cement rate per bag and sand rate per ton. This enables the calculator to come up with an actual estimate of the cost using the prevailing market prices.
5. Step 5: Click Calculate
When all the inputs have been keyed in, then press the Calculate button. The calculator shows results immediately with extensive calculations behind it.
Calculations made at the backend of this brick work cement mortar calculator
The calculator is based on the conventional civil engineering assumptions:
- Brickwork Volume = Length x Height x Thickness.
- Wet Mortar volume = 1/3 rd of the brickwork volume.
- Dry Mortar Volume = Wet mortar × 1.33
- Cement Volume = Dry mortar/ (1 + mortar ratio)
- Sand Volume = Dry mortar- cement volume.
- Cement Bags = (Cement volume × 1440) ÷ 50
- Quantity of water needed = 0.6 Cement weight.
- Sand in Tons = Sand volume × 1.6
All these computations are presented in the results section making them transparent and accurate.
Cost Calculation:
The cost of cement is calculated according to the number of cement bags and the rate per bag that is typed. The cost of sands can be determined based on the amount of sand in terms of tons as well as the price per ton. The calculator subsequently gives the total cost of mortar, which aids in the preparation of estimates, BOQs and quotations effortlessly.
What Is the Advantage of This Calculator over Calculation by Hand?
The following are the advantages of using this free brick work cement mortar calculator:
- Saves time on site
- Reduces calculation errors
- Avoids material wastage
- Helps in accurate budgeting
- Mobile and desktop user friendly.
Conclusion:
The brick work cement mortar calculator makes the estimation of brick masonry much easier by offering the right quantities and costing procedures using normal construction standards. It is an effective tool to any person in the construction of a building with clear input steps and transparent formulas at the background.
There are three benefits of adding this calculator to a WordPress construction blog: it not only benefits the users, but also contributes to the utilization and popularity of the site and its creators.
Brickwork Cement Mortar Calculator
Here are the 5 Frequently Asked Question (FAQs)
- What is the amount of mortar needed to do the brickwork?
The mortar need in a typical brick masonry work is normally considered to be 30 percent of the brickwork volume. This involves mortar that is applied to horizontal and vertical joints. Wet mortar volume in this calculator is initially determined by taking the volume of the brickwork as 3/4th of the volume of the wet mortar and finally transformed to the dry mortar volume by multiplying it by the factor 1.33 to make the correct estimation of the material.
- What is the number of bags of cement needed to do the mortar of the brickwork?
The quantity of cement bags will depend on the amount of the work of the brickwork and the proportion of the mortar mix. This calculator will convert the volume of cement into weight of cement in a density of 1440 kg/m 3 and will be converted to bags, by dividing the volume of cement by 50 kg/bag. The last outcome illustrates the quantity of cement in bags that can be readily purchased.
- What is the reason why the amount of the sand is presented in tons rather than in cubic meters?
Material vendors mostly provide and charge sand by tons. In order to be comparable with the actual site practice, this calculator is used to change the volume of sand in cubic meters into tons with a usual density of 1.6 ton per m 3. The backend calculations of quantities include both volumes and weight conversion as a sign of transparency.
- Is it possible to use this calculator in fly ash bricks or custom size of bricks?
Yes. The calculator will give you the opportunity to choose fly ash bricks or to enter a personal size of the brick. This assists in the calculation of the appropriate quantity of bricks and mortar required given the real brick size applied at the location enhancing the quality of estimation.
- Does this Indian construction project require this brickwork cement mortar calculator?
Yes. The calculator is based on the general Indian construction practices and assumptions on estimations such as percentage of mortar used, dry volume factor, cement density and sand density. It is appropriate in residential and commercial brickwork construction in India and compatible with the existing market prices.