2 Batch mixer types|Batching plant

batch mixer batching plant

Batch mixer-A type of mixing machine in batching plant, which mixes concrete in batches and releases each batch of materials separately.

2 Batch mixer types in Batching plant

batch mixer batching plant
batch mixer batching plant

The following are the 2 batch mixer types:

  1. Tilting batch mixer
  2. Non-Tilting batch mixer

Tilting batch mixer

The following are the primary points of this type of concrete mixer adopted in construction.

  • In massive construction projects, this type of tilting mixers is utilised.
  • The particles size greater than 75 mm can also be used in this type and all the elements are rolled down into this mixer.
  • For dry concrete, this mixer delivers pleasing results.
  • The sizes of this mixers are:200 T,140 T,100 T, where T = tilting, Number =Nominal volume of concrete mix in litres.
batch mixer-drum
batch mixer -drum

Non-Tilting batch mixer

The following are the primary points of this type of mixer.

  • In small construction projects, this type of mixers is practised.
  • The particle size of less than 75 mm are utilised and all the elements are raised, rolled and dumped into the mixer. 
  • The sizes of this mixers are:800 NT,400 NT,280 NT,200 NT,140 NT, where NT=Non-tilting.

Tolerances in Batching Plant

The following are the three categories these batching plants are available.

  • Fully automatic
  • Semi-automatic
  • Manual

The following are the ingredients tolerances used in cumulative and individual batches in construction.

If tare control of materials is used.

  • Cement, cementitious materials: Tolerance +/- 1% of required materials weight or +/- 0.3 % of scale capability, whichever is higher is considered.
  • Aggregates: Tolerance +/- 2% of required material weight or +/- 0.3 % of scale capability, whichever is higher is considered.
  • Water: Tolerance +/- 1% of required material weight or +/- 0.3 % of scale capability, whichever is higher is considered.
  • Admixtures: Tolerance +/- 3% of required material weight or +/- 0.3 % of scale capability or 45.4 kg minimum cement dosage rate, whichever is higher is considered.

If tare control of materials is not used.

  • Cement, cementitious materials: Tolerance +/- 1% of required cumulative materials weight or +/- 0.3 % of scale capability, whichever is higher is considered.
  • Aggregates: Tolerance +/-12% of required cumulative material weight or +/- 0.3 % of scale capability, whichever is higher is considered.
  • Admixtures: Tolerance +/- 3% of required cumulative material weight or +/- 0.3 % of scale capability or 45.4 kg minimum cement dosage rate, whichever is higher is considered.

Types of equipment for compacting concrete

The following equipment are used for compacting concrete:

  1. Tamping,
  2. Vibrators

Tamping method

The process of compacting concrete with the use of A-rod or hand tool by inserting and moving up, down for removing air bubbles out of the concrete is called tamping.

A rod of 150 mm is used for RCC works and 300 mm rod is used in mass concrete.

Vibrators

The following are the vibrators and other methods used for compacting concrete.

  1. Form Vibrator
  2. Needle vibrator
  3. Vibrating table
  4. Surface vibrator
  5. Air jets method
  6. Vibropressing method
  7. Centrifugation method
  8. Jolting or Shock method

Form Vibrator

This form vibrators are utilised in small concrete regions and densely reinforced regions where needle vibrator is able to enter into the concrete.

Needle Vibrator

For this needle vibrator a vibrating head is attached to the long flexible tube and it also consists of power unit.

With the help of this vibrating head, it will compact concrete very quickly. This vibrator is more useful in mass concreting works.

Vibrating table

For preparing prefabricated elements,when concrete mix is harsh or still,this vibrating table is used.

It is mostly used for preparing laboratory samples only.

Surface Vibrator

This Surface vibrator is termed as pan or screed vibrator. It is utilised when screeding is done and it works excellent within the concrete depths of 150 mm to 200 mm.

Airjets method

Compaction of concrete is achieved by eliminating air in concrete with the help of air jets, then all particles will come closer and gets compacted.

Vibropressing method

In this method, by vibrating form the bottom and applying external pressure from the top, compaction of concrete is performed.

This type of compaction is used for mostly in preparing of paving stones and concrete kerb stones.

Centrifugation method

In this method, the compaction of concrete is done by placing concrete in the mould and rotating the mould at great speed for eliminating water from it.

This centrigual compaction method is manufacturing of concrete water supply pipes and sewage pipes.

Jolting or shock method

In this method, the compaction of concrete is done by constraining the concrete mould to shock with the cooperation of cams.

Batch mixer Concrete finishing and Curing

Screeding is the finishing method of batch mixer concrete. It is done by eliminating excess concrete from the top surface until a proper grade is achieved.

Removal of irregularties from surface of concrete after screeding is called floating.Using woodden float this floating is performed.

Concrete curing

Curing is the method of achieving complete hydration by controlling moisture content and humidity by utilising water to concrete which is placed freshly.

Curing Objectives:

The following are the curing objectives:

  • To obtain the highest concrete compressive strength.
  • To reduce concrete shrinkage effect.
  • To improve weather resisting quality.
  • To increase the impermeability and durability of concrete.

Batch mixer Hoisting equipment

The batch mixer in batching plants and other areas for Lifting and placing of the loads from one place to another place is done by hoisting equipment.

The following are the hoisting equipments:

  • Winch
  • Pulley
  • Cranes
  • Chain hoists

Winch

This hoisting equipment works in a union of clutches, brakes, gears and guided by a set of levers.

This equipment in general used for railway gates lifting.

Pully

In Pully wire ropes and chains are used for lifting heavy objects.

Cranes

Cranes in construction are divided into two types

  1. Tower cranes
  2. Mobile cranes

Tower cranes

batch mixer-fixed tower cranes
batch mixer-fixed tower cranes

These tower cranes in very limited area provide high lifting height and better radius for working in construction field.

These tower cranes are used for shifting concrete in drums and for concreting in high raised building construction.

batch mixer-concrete placing using tower crane
batch mixer-concrete placing using tower crane

These of two types:Bottom Slewing and( top slewing) fixed tower cranes.

In the bottom slewing tower, the jib assembly and tower revolve at the base and also have swing circle at the base.

But in fixed tower cranes whirl circle is positioned at the top and enable tower top, jib assembly and operator cabin to rotate.

Mobile cranes

mobile-crane
mobile-crane

The following are the types of mobile cranes:

  1. Heavy lift cranes
  2. Telescoping boom truck mounted cranes
  3. Crawler cranes
  4. Lattice boom truck-mounted cranes
Heavy lift cranes

These heavy-lift cranes have capacities varies from 600 tons to 2000 tons.

It consists of counterweight, boom, each positioned on self-supporting crawlers which are connected by a string.

Telescoping boom truck mounted cranes

These cranes can move on public places on its own power and can assemble with minimum dismantling.

Due to its easy setup and ease of movement, first preference will be given to this crane.

Crawler cranes

On a pair of consecutive parallel crawler tracks, this crane is positioned and these crawlers help this crane for easy transportation while executing the jobs.

Due to its large ground surface area,the soil with low bearing capacity can get failure.

Lattice boom truck mounted crane

On a multi axle truck carries this crane is mounted and have full revolving superstructure and it is light weight.

But for dismantling and transporting this type of crane is very difficult.

Conclusion:

The above mentioned 2 batch mixer types are used in the construction field for mixing concrete and above-mentioned tower cranes are used for placing batch mixer concrete in high raised buildings construction works.

Read also:

5 best methods of concrete mix designs

workability 4 facts|water cement ratio

prestressed concrete materials

6 ingredients of RCC in construction

About Ashwini Kumar

Ashwini Kumar is a graduate in civil engineering from NIT Warangal. He has 8+ years of experience in the construction field. He is the author, founder of the Easy Home Builds blog

View all posts by Ashwini Kumar →

20 Comments on “2 Batch mixer types|Batching plant”

  1. Thank you for another excellent post. Where else could anyone get that type of info in such a perfect way of writing? I’ve a presentation next week, and I am on the look for such info.

  2. This is really fascinating, You are a very skilled blogger. I have joined your rss feed and stay up for looking for extra of your great post. Additionally, I have shared your website in my social networks!

  3. Usually I do not learn post on blogs, but I wish to say that this write-up very forced me to check out and do it! Your writing style has been surprised me. Thank you, quite great post.

  4. Hey! This is my first visit to your blog! We are a team of volunteers and starting a new initiative in a community in the same niche. Your blog provided us valuable information to work on. You have done a outstanding job!

  5. Thank you for the sensible critique. Me and my neighbor were just preparing to do some research about this. We got a grab a book from our local library but I think I learned more clear from this post. I am very glad to see such magnificent info being shared freely out there.

  6. You can certainly see your skills in the work you write. The world hopes for even more passionate writers like you who aren’t afraid to say how they believe. All the time follow your heart.

  7. I think this is among the most significant info for me. And i am glad reading your article. But wanna remark on some general things, The web site style is great, the articles is really great : D. Good job, cheers

  8. There are some fascinating points in time in this article however I don抰 know if I see all of them heart to heart. There’s some validity but I will take hold opinion until I look into it further. Good article , thanks and we wish more! Added to FeedBurner as effectively

  9. Great web site. A lot of useful info here. I am sending it to several friends ans also sharing in delicious. And obviously, thanks for your sweat!

  10. An excellent summary of the uses and significance of batch mixers was given in this article. Batch mixers are essential to many building projects. Having the proper tools is crucial to effectively combining materials.

Leave a Reply to Hairstyles Cancel reply

Your email address will not be published. Required fields are marked *